Steam Cleaning vs. Pressure Washing in Commercial Kitchens
Pressure washing is fast outdoors. Inside a kitchen, full of electrical controls, gas valves, and sealed wall panels, it creates more problems than it solves. Here's why HD deep cleans with commercial steam.
The problem with pressure washers indoors
- Water goes where it shouldn't: into control panels, gas valve housings, outlets, and the back of equipment.
- Walls and floors take on water: behind FRP panels, under cove base, and into floor joints, where it can sit for days.
- Grease gets moved, not removed: high pressure can blast grease onto nearby surfaces and into drains.
- Downtime: wet equipment and standing water slow down the next morning's opening.
How commercial steam works
High-temperature steam softens grease and carbon on contact so it can be wiped and scraped away, and it reaches corners, undersides, and seams that are hard to scrub. Paired with food-safe degreasers, it takes equipment back to bare stainless while using a fraction of the water.
Side by side
| Pressure washer | Commercial steam | |
|---|---|---|
| Water used | Gallons per minute, heavy runoff | A small fraction, minimal runoff |
| Electrical and gas controls | At risk of water intrusion | Protected and kept dry |
| Carbonized grease | Blasted around, often onto other surfaces | Softened by heat, then removed |
| Walls and floor joints | Water forced behind panels and into seams | Surface cleaning without soaking |
| Next-morning opening | Wet equipment and standing water | Dry equipment and floors |
When pressure washing makes sense
Outdoors: dumpster pads, loading docks, sidewalks, and grease-stained concrete. Inside the kitchen, steam is the safer tool.
See steam on real jobs on our steam cleaning page and in Our Work.
Free walkthrough & quote
Get a free quote
Tell us about your kitchen. Daniel will call you back to set up a free walkthrough.
We don't cut corners. We clean them.